Myricom Myrinet/PCI-X Network Interface Cards Especificaciones descargar pdf (Pagina 12)

Linux

If your host is running Linux, you can issue the command /sbin/lspci, which will return

all devices attached to the PCI bus.

Screen image of /sbin/lspci command.

If the output you receive is similar to that above, namely you see the “MYRICOM Inc”

entry, the Myrinet/PCI interface has been correctly detected, and you can now proceed to

installing software. Refer to the “Guide to Software” for details of the required software

and for installation instructions.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Sin comentarios

Myricom Myrinet/PCI-X Network Interface Cards Especificaciones Pagina 12